MetricsHub
MetricsHub Enterprise 1.1.00
-
Home
- Troubleshooting Protocol CLIs 10
SNMP CLI Documentation
The MetricsHub SNMP CLI allows you to interact with SNMP-enabled devices using the GET, GETNEXT, WALK, and TABLE queries. When running the CLI, you can configure the SNMP version to be used (v1 or v2c), community string, port, and retry intervals. To use SNMP v3, refer to MetricsHub SNMPv3 CLI[1].
Before using the CLI, ensure your platform supports SNMP monitoring by checking the Connector Directory[2].
Syntax
SNMP Get Request
snmpcli <HOSTNAME> --get <OID> --community <COMMUNITY> --version <VERSION> --port <PORT> --timeout <TIMEOUT> --retry <INTERVAL1>,<INTERVAL2>,...
SNMP Get Next Request
snmpcli <HOSTNAME> --getNext <OID> --community <COMMUNITY> --version <VERSION> --port <PORT> --timeout <TIMEOUT> --retry <INTERVAL1>,<INTERVAL2>,...
SNMP Walk Request
snmpcli <HOSTNAME> --walk <OID> --community <COMMUNITY> --version <VERSION> --port <PORT> --timeout <TIMEOUT> --retry <INTERVAL1>,<INTERVAL2>,...
SNMP Table Request
snmpcli <HOSTNAME> --table <OID> --columns <COLUMN,COLUMN,...> --community <COMMUNITY> --version <VERSION> --port <PORT> --timeout <TIMEOUT> --retry <INTERVAL1>,<INTERVAL2>,...
Options
| Option | Description | Default Value |
|---|---|---|
HOSTNAME |
Hostname or IP address of the SNMP-enabled device. This option is required. | None |
--version |
SNMP version to use. Possible values: 1 or 2c. |
2c |
--community |
Community string for SNMP authentication. | public |
--port |
Port on which the SNMP agent is listening. | 161 |
--timeout |
Timeout in seconds for SNMP operations. | 5 |
--retry |
Comma-separated retry intervals in milliseconds (e.g., 500,1000). |
None |
--get |
OID for SNMP Get request. | None |
--getNext |
OID for SNMP Get Next request. | None |
--walk |
OID for SNMP Walk request. | None |
--table |
OID for SNMP Table request. | None |
--columns |
Comma-separated list of column names for SNMP Table request. | None |
-v |
Enables verbose mode. Use -v for basic logs, -vv for detailed logs. |
None |
-h, --help |
Displays detailed help information about available options. | None |
Examples
Example 1: SNMP Get Request
snmpcli dev-01 --get 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.1.1 --community public --version v2c --port 161 --timeout 60 --retry 500,1000
Example 2: SNMP Get Next Request
snmpcli dev-01 --getNext 1.3.6.1.4.1.674.10892.5.5.1.20.130.4 --community public --version v2c --port 161 --timeout 60 --retry 500,1000
Example 3: SNMP Walk Request
snmpcli dev-01 --walk 1.3.6.1 --community public --version v1 --port 161 --timeout 60 --retry 500,1000
Example 4: SNMP Table Request
snmpcli dev-01 --table 1.3.6.1.4.1.674.10892.5.4.300.10.1 --columns 1,3,8,9,11 --community public --version v1 --port 161 --timeout 60 --retry 500,1000
Search Results for {{siteSearch | truncate:'50'}}
{{resultArray.length}}
No results.