Back to the list of connectors[1]

Oracle/Sun Solaris - Environment (prtdiag, lom) Enterprise

Description

This connector provides environmental information (temperatures, fans, etc.) on several Sun platforms through the prtdiag or lom utility.

This connector is superseded by:

hardware[5] solaris[6] sun[7]

Target

Typical platform: Oracle/Sun

Operating system: Oracle Solaris

Prerequisites

Leverages: Sun Solaris system commands (prtdiag, lom, etc.)

Technology and protocols: Command Lines

This connector requires advanced privileges on the managed host for the command below:

  • /usr/sbin/lom

This connector therefore needs to run as root or you need to configure a privilege-escalation mechanism like sudo on the managed host to allow the monitoring account to run the command listed above.

Sample of /etc/sudoers to allow the above command to be run as root by the metricshub account:

metricshub ALL=(root) NOPASSWD: /usr/sbin/lom

Examples

CLI

metricshub HOSTNAME -t solaris -c +SunPrtdiag --ssh -u USER --sudo-command-list /usr/sbin/lom

metricshub.yaml

resourceGroups:
  <RESOURCE_GROUP>:
    resources:
      <HOSTNAME-ID>:
        attributes:
          host.name: <HOSTNAME> # Change with actual host name
          host.type: solaris
        connectors: [ +SunPrtdiag ] # Optional, to load only this connector
        protocols:
          ssh:
            username: <USERNAME> # Change with actual credentials
            password: <PASSWORD> # Encrypted using metricshub-encrypt
            useSudo: true
            useSudoCommands: [ "/usr/sbin/lom" ]

Connector Activation Criteria

The Oracle/Sun Solaris - Environment (prtdiag, lom) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • Operating System is Oracle Solaris or Oracle Solaris
  • The command below succeeds on the monitored host
    • Command: /bin/uname -m
    • Output contains: ^sun4u[s]?$ (regex)
  • The command below succeeds on the monitored host
    • Command: /bin/ls /usr/platform/`/bin/uname -i`/sbin/prtdiag
    • Output contains: ^/usr/platform/.*/sbin/prtdiag$ (regex)

Metrics

Type Collected Metrics Specific Attributes
enclosure
  • hw.status{hw.type="enclosure", state="present"}
  • id
  • model
  • name
  • type
fan
  • hw.status{hw.type="fan", state="degraded|failed|ok"}
  • hw.status{hw.type="fan", state="present"}
  • hw.parent.type
  • id
  • name
  • sensor_location
memory
  • hw.memory.limit
  • hw.status{hw.type="memory", state="degraded|failed|ok"}
  • hw.status{hw.type="memory", state="present"}
  • hw.parent.type
  • id
  • name
power_supply
  • hw.status{hw.type="power_supply", state="degraded|failed|ok"}
  • hw.status{hw.type="power_supply", state="present"}
  • hw.parent.type
  • id
  • name
temperature
  • hw.status{hw.type="temperature", state="degraded|failed|ok"}
  • hw.status{hw.type="temperature", state="present"}
  • hw.temperature
  • hw.temperature.limit{limit_type="high.critical"}
  • hw.temperature.limit{limit_type="high.degraded"}
  • hw.parent.type
  • id
  • name
  • sensor_location
voltage
  • hw.status{hw.type="voltage", state="degraded|failed|ok"}
  • hw.status{hw.type="voltage", state="present"}
  • hw.voltage
  • hw.voltage.limit{limit_type="high.degraded"}
  • hw.voltage.limit{limit_type="low.critical"}
  • hw.parent.type
  • id
  • name
  • sensor_location
No results.