Description

This connector discovers the enclosure and the Ethernet ports of a system equipped with an MIB-2 standard SNMP Agent.

This connector is superseded by:

• CpqNICiLO^[2]
• HPP2000WBEM^[3]
• Aruba^[4]
• Juniper^[5]
• CiscoEntitySensor^[6]
• GenericSwitchEnclosure^[7]
• F5BigIP^[8]
• HPProcurve^[9]
• ExtremeNetworks^[10]
• SunXsigoSwitch^[11]

This connector supersedes:

• HPUXNetwork^[12]

hardware^[13] hp-ux^[14] network^[15] storage^[16]

Source^[17]

Target

Typical platform: Any system with SNMP

Operating systems: Network Device, Out-Of-Band, HP-UX, Storage System, HP OpenVMS, HP Tru64

Prerequisites

Leverages: MIB-2 Standard SNMP Agent

Technology and protocols: SNMP

Examples

metricshub HOSTNAME -t network -c +MIB2 --snmp v2c --community public

resourceGroups:
  <RESOURCE_GROUP>:
    resources:
      <HOSTNAME-ID>:
        attributes:
          host.name: <HOSTNAME> # Change with actual host name
          host.type: network
        connectors: [ +MIB2 ] # Optional, to load only this connector
        protocols:
          snmp:
            version: v2c # Read documentation for v1, v2c and v3
            community: public # or probably something more secure

Connector Activation Criteria

The MIB-2 Standard SNMP Agent - Network Interfaces connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

• An SNMP Get-Next on the OID 1.3.6.1.2.1.2.2.1 must return a value in the same subtree

Metrics