Description

This connector discovers the enclosure, ports, fans, power supplies, port modules, etc. of Juniper Network Switches.

This connector supersedes:

• FibreAllianceSwitch^[2]
• MIB2^[3]
• GenericSwitchEnclosure^[4]

enterprise^[5] hardware^[6] juniper^[7] network^[8]

Target

Typical platform: Juniper Network Switch

Operating system: Network Device

Prerequisites

Leverages: Juniper SNMP Agent (JUNIPER-MIB)

Technology and protocols: SNMP

Examples

metricshub HOSTNAME -t network -c +Juniper --snmp v2c --community public

resourceGroups:
  <RESOURCE_GROUP>:
    resources:
      <HOSTNAME-ID>:
        attributes:
          host.name: <HOSTNAME> # Change with actual host name
          host.type: network
        connectors: [ +Juniper ] # Optional, to load only this connector
        protocols:
          snmp:
            version: v2c # Read documentation for v1, v2c and v3
            community: public # or probably something more secure

Connector Activation Criteria

The Juniper Switch connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

• An SNMP Get-Next on the OID 1.3.6.1.2.1.2.2.1 must return a value in the same subtree
• An SNMP Get-Next on the OID 1.3.6.1.4.1.2636.3.1.15.1 must return a value in the same subtree

Metrics