Back to the list of connectors[1]

QLogic HBAs (scli) Enterprise

Description

This connector discovers QLogic HBAs of servers running Linux using the scli utility provided with the QLogic Drivers.

This connector is superseded by:

This connector supersedes:

hardware[5] linux[6] network[7] qlogic[8] solaris[9]

Target

Typical platform: Any system with QLogic

Operating systems: Linux, Oracle Solaris

Prerequisites

Leverages: QLogic's SCLI utility

Technology and protocols: Command Lines

This connector requires advanced privileges on the managed host for the command below:

  • scli

This connector therefore needs to run as root or you need to configure a privilege-escalation mechanism like sudo on the managed host to allow the monitoring account to run the command listed above.

Sample of /etc/sudoers to allow the above command to be run as root by the metricshub account:

metricshub ALL=(root) NOPASSWD: scli

Examples

CLI

metricshub HOSTNAME -t linux -c +QlogicSCLI --ssh -u USER --sudo-command-list scli

metricshub.yaml

resourceGroups:
  <RESOURCE_GROUP>:
    resources:
      <HOSTNAME-ID>:
        attributes:
          host.name: <HOSTNAME> # Change with actual host name
          host.type: linux
        connectors: [ +QlogicSCLI ] # Optional, to load only this connector
        protocols:
          ssh:
            username: <USERNAME> # Change with actual credentials
            password: <PASSWORD> # Encrypted using metricshub-encrypt
            useSudo: true
            useSudoCommands: [ "scli" ]

Connector Activation Criteria

The QLogic HBAs (scli) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The command below succeeds on the monitored host
    • Command: which scli
    • Output contains: /scli$ (regex)
  • The command below succeeds on the monitored host
    • Command: scli -g
    • Output contains: Total QLogic HBA(s) : [1-9] (regex)

Metrics

Type Collected Metrics Specific Attributes
network
  • hw.network.bandwidth.limit
  • hw.network.up
  • hw.status{hw.type="network", state="degraded|failed|ok"}
  • hw.status{hw.type="network", state="present"}
  • bandwidth
  • device_type
  • hw.parent.type
  • id
  • model
  • name
  • physical_address
  • physical_address_type
  • serial_number
  • vendor
No results.