MetricsHub
MetricsHub Enterprise 1.0.01
Back to the list of connectors[1]
IBM FlashSystem 700/800 Enterprise
Description
This connector discovers the enclosure(s) and the disks of IBM FlashSystem 700/800s as well as various environment sensors (temperatures, fans, power supplies). It relies on the SNMP protocol.
Target
Typical platform: IBM FlashSystem
Operating system: Storage System
Prerequisites
Leverages: IBM FlashSystem 700/800 SNMP Agent
Technology and protocols: SNMP
This connector is not available for the local host (it is applicable to remote hosts only).
Examples
CLI
metricshub HOSTNAME -t storage -c +IBMFlash800 --snmp v2c --community public
metricshub.yaml
resourceGroups:
<RESOURCE_GROUP>:
resources:
<HOSTNAME-ID>:
attributes:
host.name: <HOSTNAME> # Change with actual host name
host.type: storage
connectors: [ +IBMFlash800 ] # Optional, to load only this connector
protocols:
snmp:
version: v2c # Read documentation for v1, v2c and v3
community: public # or probably something more secure
Connector Activation Criteria
The IBM FlashSystem 700/800 connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- An SNMP Get-Next on the OID
1.3.6.1.4.1.8378.10.1
must return a value in the same subtree
Metrics
Type | Collected Metrics | Specific Attributes |
---|---|---|
battery |
|
|
enclosure |
|
|
fan |
|
|
network |
|
|
physical_disk |
|
|
power_supply |
|
|
temperature |
|
|
voltage |
|
|
Search Results for {{siteSearch | truncate:'50'}}
{{resultArray.length}}
No results.