Back to the list of connectors[1]

APC PDU (SNMP) Enterprise

Description

This connector enables hardware monitoring through APC PDU SNMP interface.

Target

Typical platform: APC PDU

Operating system: Out-Of-Band

Prerequisites

Leverages: PDU SNMP Enabled

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Examples

CLI

metricshub HOSTNAME -t management -c +APCPDU --snmp v2c --community public

metricshub.yaml

resourceGroups:
  <RESOURCE_GROUP>:
    resources:
      <HOSTNAME-ID>:
        attributes:
          host.name: <HOSTNAME> # Change with actual host name
          host.type: management
        selectConnectors: [ APCPDU ] # Optional, to load only this connector
        protocols:
          snmp:
            version: v2c # Read documentation for v1, v2c and v3
            community: public # or probably something more secure

Connector Activation Criteria

The APC PDU (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get on the OID 1.3.6.1.4.1.318.1.1.26.2.1.3.1 must return a value that matches with the PDU (regular expression)

Metrics

Type Collected Metrics Specific Attributes
enclosure
  • hw.enclosure.energy
  • hw.enclosure.power
  • hw.status{hw.type="enclosure", state="degraded|failed|ok"}
  • hw.status{hw.type="enclosure", state="present"}
  • id
  • info
  • model
  • name
  • serial_number
  • type
  • vendor
power_supply
  • hw.status{hw.type="power_supply", state="degraded|failed|ok"}
  • hw.status{hw.type="power_supply", state="present"}
  • hw.parent.id
  • hw.parent.type
  • id
  • name
  • power_supply_type
temperature
  • hw.status{hw.type="temperature", state="degraded|failed|ok"}
  • hw.status{hw.type="temperature", state="present"}
  • hw.temperature
  • hw.parent.id
  • hw.parent.type
  • id
  • name
  • sensor_location
No results.