APC PDU (SNMP)

Description

This connector enables hardware monitoring through APC PDU SNMP interface.

apc datacenter hardware

Enterprise Connector

This connector requires the Enterprise edition of MetricsHub.

Target

Typical platform: APC

Operating system: Out-Of-Band

This connector is not available for the local host (it is applicable to remote hosts only).

Prerequisites

Leverages: PDU SNMP Enabled

Technology and protocols: SNMP

Examples

CLI

metricshub HOSTNAME -t oob -c +APCPDU --snmp v2c --community public

metricshub.yaml

resourceGroups:
  <RESOURCE_GROUP>:
    resources:
      <HOSTNAME-ID>:
        attributes:
          host.name: <HOSTNAME> # Change with actual host name
          host.type: oob
        connectors: [ +APCPDU ] # Optional, to load only this connector
        protocols:
          snmp:
            version: v2c # Read documentation for v1, v2c and v3
            community: public # or probably something more secure

Connector Activation Criteria

The APC PDU (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

• An SNMP Get on the OID 1.3.6.1.4.1.318.1.1.26.2.1.3.1 must return a value that matches with the PDU (regular expression)

Metrics

Type	Collected Metrics	Specific Attributes
enclosure	hw.enclosure.energy hw.enclosure.power hw.status{hw.type="enclosure", state="degraded|failed|ok"} hw.status{hw.type="enclosure", state="present"}	id info model name serial_number type vendor
power_supply	hw.status{hw.type="power_supply", state="degraded|failed|ok"} hw.status{hw.type="power_supply", state="present"}	hw.parent.id hw.parent.type id name power_supply_type
temperature	hw.status{hw.type="temperature", state="degraded|failed|ok"} hw.status{hw.type="temperature", state="present"} hw.temperature	hw.parent.id hw.parent.type id name sensor_location